In the era of technologies in each part of human life, there are a lot of convenient devices that replace man force and provide the owner the opportunity to have a better quality of life. A robotic pool cleaner is the perfect example of such a device that entirely replaces manual scrubbing of the pool’s floor and walls and performs the work even better than you may do by yourself. Moreover, the owner does not even need to supervise the cleaner.

A robotic cleaner is an electronic device that works only from electricity without accessing the pool’s systems. Different models can clean not only the floor but also walls, waterline, and stairs.

You can find the model for any type, material, size, and shape of the pool. Robotic cleaners such as Dolphin e10 vs e20 are the most efficient for all parameters among all other pool cleaners – manual, pressure, and side automatic cleaners.

Dolphin E10 vs. E20 – Comparison table

Main Difference Between the Models

Even though these two cleaners look very similar and have the exact dimensions, they are designed for different pools and correspondingly have a lot of different parameters. The main differences are listed below:

Additionally, the Dolphin E10 can be bought in three options on Amazon: only a cleaner, a cleaner plus a caddy, and a cleaner with a caddy and a cover. Dolphin E20 is available only with a standard package.

Nonetheless, both models, Dolphin E20 vs. E10, have the same filter – the standard filter basket is suitable for large and middle-size debris collection; if you have a lot of sand and fine particles, you can buy an additional cartridge filter.

1. Dolphin E10 Automatic Robotic Pool Cleaner

Dolphin E10 is a top cleaner for the effortless cleaning of aboveground pools. It has an ergonomic design with a plastic handle and is lightweight at 14.6 lbs, allowing easy moving and lifting. It perfectly works for all types of aboveground pools with sizes up to 30 ft.

The E10 model has one PVC brush located in the front that actively scrubs the floor from dirt, algae, and bacteria. Through the door on the bottom, it sucks fine and rough debris collected in the net filter basket. There is a small plastic brush around the door to navigate all debris inside. The rubber wheels can move backward to prevent getting stuck in any place in the swimming pool.

The operation is the simplest than ever. Like all Maytronics pool cleaners, there is a special control panel with only one button that you need to press to start the robot.

At the end of the cleaning cycle, you need to take the cleaner out of the pool; the water will be automatically fast released. Then, you need to clean the filter from the garden hose. It has access from the top with one move; the bottom part of the large basket can be opened to throw away all collected garbage. The filter is a single-click basket.

The Dolphin E10 in the standard minimum package has a manual, a blue cable, a black cable, a control panel, and a robot. No additional hoses or pumps are required for its installation and work. Put the control panel 10 ft far from the pool in the shade and a roof; just plug in the black cable from the panel to the socket equipped with a Ground Fault Interrupter (GFI) device and a blue cable from the cleaner to the panel to the other side of the panel. The cleaner should sink in the water, and then you can press the button—no installation activities for long hours.

2. DOLPHIN Explorer E20 Robotic Pool Vacuum Cleaner

Dolphin E20 performs superior cleaning of the inground pool up to 33 ft. in length within two hours in fully automatic mode. In addition, the plastic handle on the top of the cleaner allows effortlessly to bring into the pool this light model.

As this model has more automatic features than E10, its control is executed through the separate Control Panel with more buttons. On it, you can set the weekly timer with three options of cleaning days: every day, every second, or the third day. If you set the timer for the week ahead, you need to keep the cleaner inside the pool, as it cannot move on the ground. But the filter should be cleaner after each cleaning cycle. The control panel should be stored in the shade without water access, as it is not waterproof, only splashproof.

As in the E10 model, the E20 model has the same suction door for fine and rough debris at the bottom. The filter has the same access from the top and has the same construction as the E10 filter. The filter is sufficient for most types of garbage through all seasons.

Improved scanning technology allows this cleaner not to stop on drains and clean them as well as walls. It ensures the full coverage of the floor and walls without missing a spot.

The standard package of E20 includes the same parts as for E10 (blue and black cables, a cleaner, a manual, and a control panel of different types), and a start-up process has the same steps. First, the output from the one end of the black cable should be put in the electric socket; secondly, the free output of the blue cable should be put into the control panel. Then put a robot in the water and press a button on the panel.

It is recommended to clean not only the basket from the garbage but also the body itself from the pool’s chemicals and an impeller.

Buyer’s Guide

Maytronics, the E10 and E20 models manufacturer, has successfully produced pool cleaners for more than 35 years. E10 and E20 are one of the best values among their robotic cleaners. But there are also available other robots for any budget, smaller and bigger pools. The success of robotic pool cleaners is determined by a lot of advantages that these types of cleaners can propose – for sure, the most important one is they save a lot of time:

As you can see from the detailed description and comparison table, these two pool cleaners are different. It is impossible to use one of the cleaners instead of the other. Dolphin E10 vs. Dolphin E20 have:

Design and Dimensions

Dolphin E10

• Size: 22.2 x 17.6 x 12.8 inches
• Weight: 14.6 pounds
• Color: White, light grey, dark grey

Dolphin E20

• Size: 22.2 x 17.6 x 12.8 inches
• Weight: 14.6 pounds
• Color: White, black, and light grey

verdict

Even though both models have the same dimensions and weight, they have different colors, which is vital for owners choosing the cleaner matching the pool color.

Type and size of the pool

Dolphin E10

• Pool Type: Above ground
• Vertical surface cleaning: No
• Drains cleaning: No
• Pool Sizes: Up to 30 ft.
• Cable: 40 ft

Dolphin E20

• Pool Type: In ground
• Vertical surface cleaning: Yes
• Drains cleaning: Yes
• Pool Sizes: Up to 33 ft.
• Cable: 50 ft

verdict

Two cleaners are designed for different pool types of different sizes. This should be considered during a search for a perfect pool cleaner. If you need a cleaner for the inground pool, you should look closely at Dolphin E20. If you need a cleaner for the aboveground pool, then E10 is a better choice.

Cleaning cycle and modes

Dolphin E10

• Standard Cleaning Cycle: 1.5 hours
• Weekly timer: No
• Automation mode: No
• Programs: One

Dolphin E20

• Standard Cleaning Cycle: 2 hours
• Weekly timer: Yes
• Automation mode: Yes
• Programs: Three

verdict

It is evident that Dolphin E20 has more control modes that can be set for a week ahead for a fully automatic mode. The longer cleaning cycle for this model only shows more surfaces that it can clean – not only the floor but also the walls.

Other significant cleaner parameters are the same for both models, such as:

How to choose the Best Pool Robotic Cleaner?

The importance of the right choice of such expensive robot pool cleaners is obvious. Before buying the one, it is essential to check the following parameters of your pool and desired effect from cleaning:

So, the list is not so long, and some features such as suction power or cleaner’s color can be added here, but they are not so vital.

Frequently Asked Questions

Can people swim during the work of a pool cleaner?

It is prohibited to swim in the pool while Dolphin E10 vs. Dolphin E20 (or any other pool robotic cleaners) is in and connected to the electricity.

How to take the cleaner out of the pool?

You need to kindly pull the floating cable and bring a cleaner to the edge of the pool, lift it a little bit until you can reach the handle on the top. Then, you need to keep the cleaner in the air for automatic draining of the water or put it on edge. The overall process takes not more than five minutes.

How long can a Dolphin E10 work?

With a proper change of removable parts per manual (filters, brushes), proper cleaning, and storage during wintertime, the minimum service life of Dolphin E10 is five years and longer.

Can I keep a Dolphin E20 constantly in the pool?

With a weekly scheduler, it seems like you can keep Dolphin E20 for a week in the pool, but this is not recommended. The filter should be cleaned after each time, and the cleaner's body should be washed from the pool's chemicals to prevent the seals' fast deterioration and damage to electronic equipment. Also, it is not allowed to swim while the cleaner is connected to the electricity. Therefore, it is better to put the cleaner just several hours before the cleaning procedure at least.

Conclusion

Many happy pool owners have proved that a robot pool cleaner is a must-have if you prefer having a rest to scrubbing the pool. Dolphin E10 and E20 are an excellent choice for any owner; one is for an aboveground pool, and another is for an inground pool. With powerful suction in 4000 GPH, your pool will be sparkling after not more than two hours of noiseless work of this tiny robot. They both require only a power source from the socket, no hoses or additional power. Just clean the filter and body after each usage to prolong service life for many years. So, a robot pool cleaner is a perfect investment in your leisure time.